The HJC IS-Cruiser Helmet is paired down for rugged good looks and sheer simplicity. There’s no complex lever to deploy the sun shield. You naturally grab small exposed tabs and pull it down, so not much to go wrong here. No frills, no fuss.
The HH65 Naked Half Helmet packs a full roster of features into a slick half-helmet shell. This low profile lid delivers V-twin style while concealing a dual-density EPS liner and earning a DOT certification. A tinted drop down sun visor slides into action when the sun hits eye level. This tinted shield can be swapped without tools for a clear visor (included) for UV protection and to shield the eyes from the wind.
Internally, channels in the injection-molded EPS help pass air over the rider’s head, and a removable / washable liner using Coolmax Core Technology helps regulate heat as it pulls perspiration away from the rider and facilitates evaporation. The polycarbonate shell is a continuous, uninterrupted form with either black or polished rivet hardware for a look that pairs well with any ride. An included neck curtain can be easily added or removed to regulate temperatures further and help shield the rider from wind bast. This snap-in neck curtain also features speaker pockets to make Bluetooth installation easier (Bluetooth sold separately).
The HH65 Naked Half Helmet shares many of the same features found in the GM65 Helmet. The HH65 Helmet, however, uses a quick-release ratchet strap closure with micro adjustment instead of a double D-ring buckle.
The EXO-C110 is Scorpion’s next generation take on a classic helmet. The EXO110 features subtle modern lines, an advanced ventilation system, a dual EPS liner, and an improved SpeedView sunvisor mechanism. These features allow the EXO-C110 to provide a premium feel while maintaining the classic half helmet look and fit.
Note: The EXO-C110 runs slightly small. If you are between sizes, order the larger size.
Why trust us? We have a special algorithm that helps us rate and review each product!
The LS2 Verso is a lightweight, versatile and all-day comfortable helmet, perfect for touring, commuting, scooters or whatever your riding preference may be. The optically correct, fog resistant, Class A polycarbonate face shield has a built-in diffuser across the bottom to redirect airflow to help add additional protection against fog. The built-in Twin Shield System drop-down internal sun shield is controlled by the large knob on the left side of the helmet and engages with a twist. It is easy to use, even with a gloved hand. When you lift the face shield, the sun shield also retracts, giving you a clear view for reading your maps, or talking to your riding partners. You can re-engage the sun shield while the face shield is up, for sun protection during slow speed riding. The face shield uses an innovative C tab to connect it to the helmet, and can be removed and replaced with a sun peak, included with every Verso. Face shield or peak, it’s your choice. LS2 uses two shells for the smallest, lightest helmet possible. The shell is made from LS2’s proprietary Kinetic Polymer Alloy (KPA), a light, strong polymer with a very high penetration resistance. An adjustable top vent is ported through the liner for flow-through ventilation. The removable comfort padding is hypoallergenic, breathable and washable. The quick release chinstrap assures a secure fit.
Note: The LS2 Verso Helmet fits snug and high around the jaw to occlude noise. It may not be a good choice for riders who require a little more room in the jaw area.
You can make your own decision on the “naked” part of the deal, but the HH65 Devotion Naked Helmet packs a full roster of features into a slick half-helmet shell. This low profile lid delivers V-twin style while concealing a dual-density EPS liner and earning a DOT certification. A tinted drop down sun visor slides into action when the sun hits eye level. This tinted shield can be swapped without tools for a clear visor (included) for UV protection and to shield the eyes from the wind.
Internally, channels in the injection-molded EPS help pass air over the rider’s head, and a removable / washable liner using Coolmax Core Technology helps regulate heat as it pulls perspiration away from the rider and facilitates evaporation. The polycarbonate shell is a continuous, uninterrupted form with either black or polished rivet hardware for a look that pairs well with any ride. An included neck curtain can be easily added or removed to regulate temperatures further and help shield the rider from wind bast. This snap-in neck curtain also features speaker pockets to make Bluetooth installation easier (Bluetooth sold separately).
The HH65 Devotion Naked Helmet shares many of the same features found in the GM65 Helmet. The HH65 Naked Helmet, however, uses a quick-release ratchet strap closure with micro adjustment instead of a double D-ring buckle.
Ride in comfort with the BILT Route 3/4 Helmet.
Just when you thought it couldn’t get any better, Bell went back to the lab to make improvements to the legendary Custom 500. A new headform means the Custom 500 now fits better and looks smaller on your head than ever. No more bobbleheads. The thin-profile shell allows the Bell Custom 500 helmet to sit lower on the head, and with 5 shell and EPS sizes, it’s now even easier to find the look you want with the perfect fit.
Note: The Bell Custom 500 runs slightly small. If you are between sizes, order the larger size.
Some folks will measure torque at a vehicle’s crankshaft. Others measure torque at the wheels. Regardless of method, there is no fudging Torque Naked.
The GMax HH65 Torque Naked Helmet packs a full roster of features into a slick half-helmet shell. This low profile lid delivers V-twin style while concealing a dual-density EPS liner and earning a DOT certification. A tinted drop down sun visor slides into action when the sun hits eye level. This tinted shield can be swapped without tools for a clear visor (included) for UV protection and to shield the eyes from the wind.
Internally, channels in the injection-molded EPS help pass air over the rider’s head, and a removable / washable liner using Coolmax Core Technology helps regulate heat as it pulls perspiration away from the rider and facilitates evaporation. The polycarbonate shell is a continuous, uninterrupted form with either black or polished rivet hardware for a look that pairs well with any ride. An included neck curtain can be easily added or removed to regulate temperatures further and help shield the rider from wind bast. This snap-in neck curtain also features speaker pockets to make Bluetooth installation easier (Bluetooth sold separately).
The HH65 Torque Naked Helmet shares many of the same features found in the GM65 Helmet. The HH65 Naked Helmet, however, uses a quick-release ratchet strap closure with micro adjustment instead of a double D-ring buckle. Torque at your own risk.
Just when you thought it couldn’t get any better, Bell went back to the lab to make improvements to the legendary Custom 500. A new headform means the Custom 500 now fits better and looks smaller on your head than ever. No more bobbleheads. The thin-profile shell allows the Bell Custom 500 helmet to sit lower on the head, and with 5 shell and EPS sizes, it’s now even easier to find the look you want with the perfect fit.
Note: The Bell Custom 500 runs slightly small. If you are between sizes, order the larger size.
The HH65 Rose Naked Helmet packs a full roster of features into a slick half-helmet shell. This low profile lid delivers V-twin style while concealing a dual-density EPS liner and earning a DOT certification. A tinted drop down sun visor slides into action when the sun hits eye level. This tinted shield can be swapped without tools for a clear visor (included) for UV protection and to shield the eyes from the wind.
Internally, channels in the injection-molded EPS help pass air over the rider’s head, and a removable / washable liner using Coolmax Core Technology helps regulate heat as it pulls perspiration away from the rider and facilitates evaporation. The polycarbonate shell is a continuous, uninterrupted form with either black or polished rivet hardware for a look that pairs well with any ride. An included neck curtain can be easily added or removed to regulate temperatures further and help shield the rider from wind bast. This snap-in neck curtain also features speaker pockets to make Bluetooth installation easier (Bluetooth sold separately).
The HH65 Rose Helmet shares many of the same features found in the GM65 Helmet. The HH65 Rose Naked Helmet, however, uses a quick-release ratchet strap closure with micro adjustment instead of a double D-ring buckle. Beware of thorns.