Scratch-resistant, pinlock-ready face shield for AGV K3 SV, K5, K5 S and K1 Helmets. Face shields are helmet size specific. Select face shield that matches your helmet’s size.
Note: Compatible with GT 4 Pinlock Lens Insert only. Not compatible with GT 2 Pinlock Lens Inserts.
The Pro Shield from Icon fits 2010+ Domain 2, Alliance, Alliance GT and Airframe helmets however not the Airframe Pro. This shield keeps you riding fog free and will stay locked down at speed.
The CWR-1 Pinlock-Ready Face Shield fits Shoei RF-1200, RF-SR and X-14 Helmets and provides a vast field of vision that rivals other face shields. In addition to protecting against 99% of the sun’s damaging UV rays, the CWR-1 face shield offers a distortion-free view throughout the entire range thanks to Shoei’s 3D injection-molding process. While the CWR-1 does not feature the Vortex Generators found on the CWR-F, innovative ribs on the top and bottom edge of the shield improve rigidity and eliminate the bending that may occur from wind pressure and during the opening and closing process. Finally, the improved shield locking mechanism rounds out Shoei’s most advanced shield system to date.
Pinlock lens insert sold separately.
Note: Due to manufacturer restrictions, Shoei products can only be shipped to addresses within the United States.
Mellow Smoke tint is the lightest tint available from Shoei. The light transmittance ratio for Mellow Smoke is approximately 60%. For Light Smoke, the transmittance ratio is approximately 40%. For reference, a clear face shield offers a light transmittance ratio around 85%.
Why trust us? We have a special algorithm that helps us rate and review each product!
Instead of carrying an extra Proshield for changing light conditions, with the flip of a switch, engage the tinted Dropshield hidden within the helmet. Tinted Dropshields should not be used during hours of low light; instead swap out for a yellow lens or just use the clear ICON Proshield. The Dropshield visor must only be used while the main face shield is in the fully closed position.
The Biltwell Bubble Shield is a new take on a tried and true design. Made with injection-molded polycarbonate, these tough retro 3-snap shields come in a variety of colors/tints to suit your lid, mood, weather, whatever.
The AGV Corsa / Pista GP / GT Veloce Race Face Shield feature 2 pivot screws that prevent the face shield from coming off in the event of a crash.
Flat anti-scratch and polycarbonate complete with tear-off posts.
Note: Face shield can not be removed without removing the pivot screws. Unable to be quickly interchanged for other tints. Dark Smoke shield is not quite as dark as shown in product photos.
The AGV AGVisor LCD Face Shield fits the AGV Corsa, Corsa R, Pista GP, Pista GP R, GT Veloce and Veloce S Helmets. With just one click of a button and in less than a second, the AGV AGVisor LCD Faceshield changes from Clear to Smoke. When the rechargeable battery runs low, the fail-safe system automatically switches to clear. The LCD AGVisor can be easily operated while riding thanks to its ergonomic design.
Specifically designed for Blade, the ESV-2 (External Sun Visor 2) is a 80% tinted anti-scratch sunshade screen for use with the standard clear visor. Just lower it to protect your eyes from extremely intense sunlight or flip it up when in normal light conditions. No need to assemble/disassemble the face shield.