The Bull-it SR6 Easy Jeans have a relaxed fit. SR6 refers to the amount of abrasion resistance. SR6=6.26 seconds of abrasion protection. Compare this with 1.4MM cowhide’s 5.8 seconds of abrasion resistance, and you’ll agree that the Bull-it SR6 Jeans set a higher standard. You’ll find yourself reaching for the Bull-it SR6 Easy Jeans whenever you ride.
A bright idea worthy of a sun salutation, the stretchy and stylish Yoga moto Jeans are Comin’ in Hot. Designed for maximum flex and fashion, the Yogamoto Pants look great and feel supremely comfortable whether you ride a sport bike in a sort of bound angle pose or a cruiser in more of a reclining hero.
And, to make them as formidable as Warriors 1 through 3 combined, the knee and seat are reinforced with aramid fiber (you know… in case you go downward dog). Namaste safe out there in the Speed & Strength Comin’ In Hot Yogamoto Pants.
Note: We suggest going down 1 size from what the Size Chart recommends for a better fit in the waist.
Covec fibers add cut, tear and heat transfer resistance to the denim hybrid Bull-it Tactical series of riding jeans. While other jeans stitch in panels of abrasion-resistant material, Bullit Tactical Jeans maintain the easy-wearing, lightweight feel of casual jeans by achieving high abrasion resistance from a single reinforced layer of denim. The Bull-it SP75 Easy Jeans have a traditional look with a relaxed fit.
The Bull-it SR6 Sidewinder Jeans have a slim fit at the waist, hips and thigh. These straight leg jeans are suitable for inside or outside any boot. SR6 refers to the amount of abrasion resistance. SR6=6.26 seconds of abrasion protection. Compare this with 1.4MM cowhide’s 5.8 seconds of abrasion resistance, and you’ll agree that the Bull-it SR6 Jeans set a higher standard. Add in a water repellent finish, and you’ll find yourself reaching for the Bull-it SR6 Jeans whenever you ride.
Note: Bull-it recommends that if you are looking for a regular fit, go to the next size up.
The Revit Brentwood Slim Fit jeans get the slim cut and still remain protective thanks to four-way stretch Cordura denim. The material stretches, but still retains a high resistance to abrasion. That extra stretch also provides freedom of movement suitable for multiple riding positions. CE Level 1 knee protectors come standard along with pockets prepared for REV’IT! RV33 hip armor (sold separately). Balance fashion, comfort and protection with the Rev’it Brentwood Slim Fit Jeans.
The Icon 1000 MH1000 Jeans take Cordura denim and configures it into a relaxed cut jean. Aramid knee reinforcement bolsters abrasion resistance while CE level 1 rated D3O armor at the knees and hips absorb impact energy. External zippered armor pockets allow you to remove armor once you reached your destination so you can walk around unencumbered and unassuming.
The Rokker Revolution Jeans bring you the best of both worlds that blend style and protection together so you no longer chose one or the other. They are made of 100% Schoeller Denim-Dynatec, an innovative combination of Schoeller Dynatec and denim which is extremely resistant to abrasion and offers a genuine jeans-look. What makes these jeans even more Revolutionary, is the integrated c_change membrane which helps to regulate body heat and is 100% waterproof and windproof. As soon as moisture is produced as a result of increased body heat, the membrane structure opens and allows excess heat and water vapor to escape to the outside air. As the body produces less heat and less moisture, the membrane structure contracts again to trap and maintain body heat.
The Rokker philosophy is style and protection without compromise, and the Rokker Revolution Jeans achieve both.
Note: RevZilla has found the Rokker Revolution Jeans to run about 1/2 inch small in terms of waist measurement and suggests going with the larger of the two waist measurements if you are between sizes.
The chance of survival is bleak out in the borderland. To persevere you need three things: a good pair of jeans, a bomber bike, and all the guzz’olene you can haul. The Icon Akromont Jeans can fulfill the former. Superior build quality, aramid fiber reinforcements, D3O knee impact protectors and a heavy-duty Cordura denim chassis prepare these riding denims for damnation alley and beyond. Securing the petrol is up to you.
Who says men get all the good gear? The Oakland for women are a pair of traditional style jeans, woven with stretch denim for comfort when riding. Boot cut and yet snug enough so they don’t drag on the ground. Longer inseam for riding. Inside they are reinforced with heat- and tear-resistant Aramid fabric and removable CE approved knee protection.
Note: We have found that these jeans run large and recommend you go down 1 size from your normal dress size.
Ideal for a slim athletic build, the REVIT Madison 2 Women’s Jeans are designed for riders looking for the style and feel of their casual jeans with inconspicuous protection. Using 12.5oz Cordura denim, the REVIT Madison 2 Jeans maintain a lightweight single-layer construction while delivering abrasion resistance. 20% polyamide offers just a touch of stretch to allow for a form-flattering fit and flexibility in the riding position. Thin, soft CE-rated Seesmart protectors come standard at the knees and can be added in the hips to increase impact protection (sold separately) with the prepared pockets in the REVIT Madison Jeans. For the female rider seeking denim with a mid-rise fit and low profile moto-protection, the REVIT Madison Women’s Jeans are the perfect fit.
Note: We have found adding 4″ to the waist measurement in the sizing is a more accurate size range, ie, a 34×32 will have a 38″ waist.