One face shield to rule them all, this puppy is a direct replacement ClickRelease face shield for Bell Vortex, Star, Revolver EVO, RS-1, RS-2, Qualifier and Qualifier DLX Helmets. Leave it to good ‘ol American ingenuity to create a line of helmets that all use one face shield, eliminating the need to keep track of tricky nomenclature when trying to order a new shield for your favorite lid.
Note: Gradient shield flows from yellow to clear. Not compatible with Bell Star helmets with Panovision lenses. Fits Bell Star Helmets made prior to 2016 only.
The CWR-1 Pinlock-Ready Face Shield fits Shoei RF-1200, RF-SR and X-14 Helmets and provides a vast field of vision that rivals other face shields. In addition to protecting against 99% of the sun’s damaging UV rays, the CWR-1 face shield offers a distortion-free view throughout the entire range thanks to Shoei’s 3D injection-molding process. While the CWR-1 does not feature the Vortex Generators found on the CWR-F, innovative ribs on the top and bottom edge of the shield improve rigidity and eliminate the bending that may occur from wind pressure and during the opening and closing process. Finally, the improved shield locking mechanism rounds out Shoei’s most advanced shield system to date.
Pinlock lens insert sold separately.
Note: Due to manufacturer restrictions, Shoei products can only be shipped to addresses within the United States.
Mellow Smoke tint is the lightest tint available from Shoei. The light transmittance ratio for Mellow Smoke is approximately 60%. For Light Smoke, the transmittance ratio is approximately 40%. For reference, a clear face shield offers a light transmittance ratio around 85%.
Replacement face shield for the Icon Airflite Helmets.
Why trust us? We have a special algorithm that helps us rate and review each product!
Replacement face shield for Sedici Strada 2 Helmets.
Replacement Elliptic II EverClear no-fog face shield for the Scorpion EXO-R420 Helmets.
Note: The Ruby Mirrored face shield is lighter than pictured.
Scratch-resistant, pinlock-ready face shield for AGV K3 SV, K5, K5 S and K1 Helmets. Face shields are helmet size specific. Select face shield that matches your helmet’s size.
Note: Compatible with GT 4 Pinlock Lens Insert only. Not compatible with GT 2 Pinlock Lens Inserts.
The Pro Shield from Icon fits 2010+ Domain 2, Alliance, Alliance GT and Airframe helmets however not the Airframe Pro. This shield keeps you riding fog free and will stay locked down at speed.
Replacement iridium face shields for LS2 Assault, Rapid and Stream Helmets.
Transitions Photochromic technology allows visors to automatically and seamlessly change from clear to dark in sunlight. The process works when photochromic dyes embedded into the lens or shield react to UV light, changing levels of darkness with the sun.
When UV light is removed, a chemical reaction driven by ambient heat reconverts the activated photochromic molecules to their original, clear form and the lens fades.
Note: The Shoei CWR-F Pinlock Evo Lens Insert that is included with Shoei X-14 Helmets does not fit this face shield. Due to manufacturer restrictions, Shoei products can only be shipped to addresses within the United States