10 Best Motorcycle Gas can Review Guide

Updated May 2022

1

VP Racing Square Jerry Can

VP Racing Square Jerry Cans are made with the premium high-density polyethylene. The containers feature an ergonomically contoured handle, bottom grip for easy pouring and a non-breakable multipurpose cap with rubber gaskets. To withstand transit, truck beds and trailering, the containers feature 30% more material in their construction than standard containers. Each jug is subjected to a 15-point quality test by VP. Pouring hose is not included. 

Features:

  • Choose between 5 or 3 gallon capacity
  • Petroleum-safe virgin high-density polyethylene
  • Ergonomically contoured handle for easy pouring
  • Multipurpose vented cap with rubber gasket with lanyard
  • Red can should be used exclusively for gas
  • Red plug easily removes with a 1/2″ ratchet (not included)
  • Designed for racing fuel only – such as nitromethane or methanol, used in sanctioned motorsports
  • Not for fuel used on highways
  • Also for storage and transport of feed, water, attractants, fluids and other outdoor products
  • This is not a portable fuel container as described by ASTM, EPA, ARB and other official agencies

Note:  Please verify with state law as most gas stations will only allow filling up of RED cans. Fill Hose sold separately.

2

Tuff Jug Ripper Jug

The Ripper Jug is capable of pouring up to 5 gallons in 38 seconds. Fluids stop flowing after reaching the end of the spout automatically, just pull up and the valve shuts off the fluid flow. There is no vent to open or close or to leak when pouring.

Features:

  • Easy fill and pour
  • Automatic valve on cap
  • Ergonomic handle aids in pouring

Note: Only the Red Ripper Jugs are CARB compliant for use in California. Ripper spout color may vary. Due to the variety of gas tank types, additional spouts, hoses and/or caps may be required (sold separately).

3

VP Racing Square Jerry Can Cap

Cap for VP Racing Square Jerry Can.

Note: Red plug easily removes with a 1/2″ ratchet.

We hope you like our guide on Motorcycle Gas can Reviewed For You

Why trust us? We have a special algorithm that helps us rate and review each product! 

4

RotopaX Gasoline Pack

In the middle of nowhere, there’s not a fluid that’s more precious to a motorcyclist than gasoline. A RotopaX container is an ultra-durable, compact and modular means of securing extra fuel to your ride. RotopaX containers are rotationally molded for unrivaled strength in comparison to traditional, inexpensive blow-molded designs. The plastic specification is optimized against color fade and mechanical degradation while a sure-seal gasket ensures a leak proof closure.

ALSO READ  Battery Tender For Motorcycle

Each RotopaX Pack is designed to secure via its central port. A RotopaX Pack Mount sleeves into this slot to support the weight of the pack from its center. This makes finding a mounting point on your bike much easier because you’re hunting for a smaller footprint relative to the size of the pack. Common mounting locations are on top case luggage racks, side case racks or attached to luggage systems themselves. RotopaX Packs are designed to stack upon each other with a Pack Mount Extension, so you can increase your capacity as the situation demands.

Features:

  • ECO Spout turns around and stores inside of the gas pack and does not allow fuel to dispense until light pressure is applied against the tank being filled
  • Rotationally molded for increased strength and colorfast, leak-proof use
  • Solid thick walls and extra threads with a sure-seal gasket guarantee it will not leak or vibrate loose
  • Exclusive modular system design allows for flexible customization between multiple packs
  • Utilizes RotopaX mounting system sold separately

Dimensions:

  • 1 Gallon – 9.5″L x 13.5″W x 3″H
  • 1.75 Gallon – 14″L x 15″W x 3.5″H
  • 2 Gallon – 18.5″L x 13.5″W x 3″H
  • 3 Gallon – 15″L x 16″W x 4.5″H
  • 4 Gallon – 34.5″L x 13.25″W x 3″H

5

RotopaX Gasoline CARB Pack

In the middle of nowhere, there’s not a fluid that’s more precious to a motorcyclist than gasoline. A RotopaX container is an ultra-durable, compact and modular means of securing extra fuel to your ride. RotopaX containers are rotationally molded for unrivaled strength in comparison to traditional, inexpensive blow-molded designs. The plastic specification is optimized against color fade and mechanical degradation while a sure-seal gasket ensures a leak proof closure.

Each RotopaX Pack is designed to secure via its central port. A RotopaX Pack Mount sleeves into this slot to support the weight of the pack from its center. This makes finding a mounting point on your bike much easier because you’re hunting for a smaller footprint relative to the size of the pack. Common mounting locations are on top case luggage racks, side case racks or attached to luggage systems themselves. RotopaX Packs are designed to stack upon each other with a Pack Mount Extension, so you can increase your capacity as the situation demands.

Features:

  • ECO Spout turns around and stores inside of the gas pack and does not allow fuel to dispense until light pressure is applied against the tank being filled
  • Rotationally molded for increased strength and colorfast, leak-proof use
  • Solid thick walls and extra threads with a sure-seal gasket guarantee it will not leak or vibrate loose
  • Exclusive modular system design allows for flexible customization between multiple packs
  • Utilizes RotopaX mounting system sold separately
  • CARB compliant

Dimensions:

  • 1 Gallon – 9.5″L x 13.5″W x 3″H
  • 1.75 Gallon – 14″L x 15″W x 3.5″H
  • 2 Gallon – 18.5″L x 13.5″W x 3″H
  • 3 Gallon – 15″L x 16″W x 4.5″H
  • 4 Gallon – 34.5″L x 13.25″W x 3″H
ALSO READ  Yoshimura Exhaust

6

RotopaX One Gallon Gasoline Pack or Water Pack With Standard Mount Set

In the middle of nowhere, there’s fewer fluids more precious to a motorcyclist than water or gasoline. A RotopaX container is an ultra-durable, compact and modular means of securing extra fuel to your ride. RotopaX containers are rotationally molded for unrivaled strength in comparison to traditional, inexpensive blow-molded designs. The plastic specification is optimized against color fade and mechanical degradation while a sure-seal gasket ensures a leak proof closure.

Each RotopaX Pack is designed to secure via its central port. A RotopaX Pack Mount sleeves into this slot to support the weight of the pack from its center. This makes finding a mounting point on your bike much easier because you’re hunting for a smaller footprint relative to the size of the pack. Common mounting locations are on top case luggage racks, side case racks or attached to luggage systems themselves. RotopaX Packs are designed to stack upon each other with a Pack Mount Extension, so you can increase your capacity as the situation demands.

Features:

  • Gasoline Pack: ECO Spout turns around and stores inside of the gas pack and does not allow fuel to dispense until light pressure is applied against the tank being filled
  • Water Pack: Yellow self-breathing flex spout turns around and stores inside of the water pack
  • Rotationally molded for increased strength and colorfast, leak-proof use
  • Solid thick walls and extra threads with a sure-seal gasket guarantee it will not leak or vibrate loose
  • Exclusive modular system design allows for flexible customization between multiple packs
  • Attaches to OEM and after-market mounting brackets
  • Utilizes own RotopaX mounting system for a lockable, stackable, secure mount of multiple packs

Includes:

  • One RotopaX 1 Gallon Gasoline Pack OR One RotopaX 1 Gallon Water Pack
  • 1 RotopaX Standard Pack Mount

Dimensions:

  • 1 Gallon – 9.5″L x 13.5″W x 3″H

Note: Does not include Loctite or other thread locker.

7

RotopaX One Gallon Gasoline Pack With Deluxe Mount Set

In the middle of nowhere, there’s not a fluid that’s more precious to a motorcyclist than gasoline. A RotopaX container is an ultra-durable, compact and modular means of securing extra fuel to your ride. RotopaX containers are rotationally molded for unrivaled strength in comparison to traditional, inexpensive blow-molded designs. The plastic specification is optimized against color fade and mechanical degradation while a sure-seal gasket ensures a leak proof closure.

Each RotopaX Pack is designed to secure via its central port. A RotopaX Pack Mount sleeves into this slot to support the weight of the pack from its center. This makes finding a mounting point on your bike much easier because you’re hunting for a smaller footprint relative to the size of the pack. Common mounting locations are on top case luggage racks, side case racks or attached to luggage systems themselves. RotopaX Packs are designed to stack upon each other with a Pack Mount Extension, so you can increase your capacity as the situation demands.

ALSO READ  Motorcycle Tool Kit

Features:

  • Gasoline Pack: ECO Spout turns around and stores inside of the gas pack and does not allow fuel to dispense until light pressure is applied against the tank being filled
  • Rotationally molded for increased strength and colorfast, leak-proof use
  • Solid thick walls and extra threads with a sure-seal gasket guarantee it will not leak or vibrate loose
  • Exclusive modular system design allows for flexible customization between multiple packs
  • Attaches to OEM and after-market mounting brackets
  • Utilizes own RotopaX mounting system for a lockable, stackable, secure mount of multiple packs

Includes:

  • One RotopaX 1 Gallon Gasoline Pack
  • 1 RotopaX Deluxe Pack Mount

Dimensions:

  • 1 Gallon – 9.5″L x 13.5″W x 3″H

Note: Does not include Loctite or other thread locker.

 
 

8

Primus Fuel Bottle

A Primus Fuel Bottle allows you to tote around extra gas for your bike or fuel for various camping stoves. 

Features:

  • Extruded aluminum construction
  • Lacquered interior
  • 0.92 liter capacity (31oz)
  • 9.8″ L x 3.1″ W
  • 7.5oz weight

Compatibility:

  • Gasoline
  • Diesel
  • Kerosene
  • Aviation fuel

9

VP Racing Square Jerry Can Fill Hose

Fill Hose for VP Racing Square Jerry Can.

Features:

  • 14″ hose assembly with cap

10

Saddlemen Reda Gas Can Saddlebag Liner Bag For Harley Touring

Single companion bag liner to match the the Saddlemen Cube Liner Set. This bag is for those long hauls when you need to carry more gas than your tank will allow. Made from light, but durable PVC-lined 150-denier polyester with sturdy zippers that permit over-packing but keep the elements away from your cargo. Great for trips, over-nighters and organizing your tools or cleaning supplies. Simply lift your liners out of the saddlebags to move your cargo easily into the hotel, campground or to unload fast once you’re home.

Features:

  • Dimensions: 5 3/4″ wide x 15 1/2″ long x 10 1/2″ tall
  • Sold each

Note: The Reda Gas Can is sold separately.