10 Best Motorcycle Camera Mount Review Guide

Updated May 2022

1

RAM Mounts Universal Camera and Camcorder 1″ Ball Base

The RAM-B-202A, RAP-B-366, and RAM-B-237 universal camera and camcorder bases consist of a 1″ diameter rubber ball connected to a 1/4″-20 camera thread. The round plate on the RAM-B-202A and RAP-B-366 provides extra support and stability for cameras that rest on top of it. The male 1/4″-20 threaded steel stud will connect to any standard female thread found on camcorders and digital cameras.

Compatible Cameras:

  • Any camera with a 1/4″ – 20 thread

Material:

  • AMPS Hole Pattern Base or No Base – Powder Coated Marine Grade Aluminum 
  • Plain Base – High Strength Composite

Ball Size:

  • 1″ Rubber Ball “B” Size

2

RAM Mounts U-Bolt GoPro Kit

The RAM-B-149Z-GOP1U consists of a zinc coated u-bolt base, standard 3″ double socket arm and 1″ diameter ball with custom GoPro® Hero adapter. The mount is designed with a RAM 1″ diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. Included in this package is hardware that will accommodate rails from 0.50″ to 1.25″ in diameter. The base includes black cover caps to be placed over the exposed ends of the u-bolt. The included composite rail adapter can narrow the rail to a minimum width of 0.5″.

The GoPro® Hero adapter attaches directly to the under-side of the camera, replacing the factory mounting bracket.

U-Bolt Dimensions:

  • Accommodates rails from 0.5″ to 1.25″ in diameter

Material:

  • High Strength Composite & Powder Coated Marine Grade Aluminum

Ball Size:

  • 1″ Rubber Ball “B” Size 

3

RAM Mounts Rail /  Handlebar U-Bolt Camera Kit

The RAM-B-132-309U zinc coated u-bolt rail base consists of the 1″ diameter ball and socket system with RAM Universal 1/4″-20 thread centered on a 2.5″ diameter plate. This is designed to be a universal mounting solution for both still and moving cameras. The base has a 1.0″ diameter rubber ball designed to sit at right angles to the mounting rail. The zinc coated metal u-bolt and nuts included will fit a circular rail with diameter from 0.5″ to 1.25″.

Material:

  • Powder Coated Marine Grade Aluminum

Ball Size:

  • 1″ Rubber Ball “B” Size

Installation: To mount the rail base, place the top of the base on the rail and then slide the u-bolt around the rail, into the holes in the base top. Now tighten the screws onto the u-bolt until the base is clamped firmly. If you desire, you can now slot the black composite covers over the exposed ends of the u-bolt.

ALSO READ  Helmet Lock Motorcycle

We hope you like our guide on Motorcycle Camera Mount Reviewed For You

Why trust us? We have a special algorithm that helps us rate and review each product! 

4

RAM Mounts Handlebar U-Bolt or Brake/Clutch Clamp Camera Kit

The base consists of a 1″ diameter rubber ball, hardware for mounting to both brake/clutch reservoirs and rails that are 0.5″ to 1.25″ in diameter. The mounting hardware for brake/clutch reservoirs include both standard and metric mounting bolts. Multiple pivot points, rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your device is safe, secure, and within easy reach.

The camera base/ball adapter contains a 1″ rubber ball that is connected to a 2.5″ diameter round base. Also included is a centered 1/4″-20 threaded steel stud, The round base provides support and stability for cameras that rest on top of it. The male 1/4″-20 threaded steel stud will connect to any standard female thread found on camcorders and digital cameras.

Included:

  • 1 Base/ball adapter (attaches directly to camera)
  • 1 Standard size double socket arm
  • 1 Mounting base (mounts to either brake/clutch reservoir or rail/handlebar)
  • Hardware for mounting to either brake/clutch reservoir or rail/handlebar

Material:

  • Powder Coated Marine Grade Aluminum

Ball Size:

  • 1″ Rubber Ball “B” Size

Note: The RAM-B-174-202A can mount to both the brake/clutch reservoir or any round rail that is 0.5″ to 1.25″ in diameter. To see if the base will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centers have a minimum width of 0.94″ and a maximum of 1.58″.

 
 

5

RAM Tough-Strap Action Camera Mounting Kit

Ready for any adventure, the RAM® Tough-Strap™ is the lowest profile, rugged mounting solution for motorcycle or bicycle handlebars. With two different size straps you can easily install the Tough-Strap on any motorcycle, bicycle, or e-bike with a simple twist of a knob. This mount includes a B size ball base so you can attach any RAM® B size socket arm and your desired device holder to complete your solution. The long strap is used for bar diameters ranging from 1.25″-1.38″ while the short strap is used for diameters ranging from 0.875″-1″. Utilize the extra rubber strip to cut down to the diameter range of 1″-1.125″ for a more custom fit. This mounting kit includes a GoPro action camera mounting adapter as well as a short length socket arm allowing you to mount your action camera in many different adjustable positions to get the best possible shot.

ALSO READ  Motorcycle Knee Pads

Features:

  • Low profile handlebar mount for GoPro and other similar action cameras
  • Works for all bike types including motorcycles, bicycles and eBikes
  • RAM® Tough-Strap™ easily attaches to your handlebar with the turn of a single knob
  • Includes two different strap sizes for handlebars
  • Long strap ranges from 1.25″-1.38″ diameter
  • Small strap ranges from 0.875″-1″ diameter
  • An extra rubber strap allows ranges from 1″-1.25″ diameter
  • Short length RAM B size socket arm allows for adjustable positioning
  • RAM GoPro adapter slots into GoPro and other similar action camera mounts
  • Made of high-strength composite and stainless steel hardware for durability and reliability in the most demanding environments

Includes:

  • RAM ball base
  •  #10-24 x 2.5″ machine screw
  • Long strap
  • Short strap
  • Long rubber strip
  • Short rubber strip
  • Tightening knob
  • Short length RAM B size socket arm
  • RAM GoPro adapter

Note: Images are for reference only. Action camera is not included.

 
 

6

Cycle Mount GoPro Mount

The Cycle Mount for GoPro allows you to mount a GoPro where ever a M8 or M10 x 1.25 thread is available. Eliminate flex and vibration associated with stick on mounts. They offer a full 360 degree rotation and vertical tilt for the best camera angle. 

7

RAM Mounts GoPro Hero Adapter

GoPro® cameras have reinvented how we capture some of the most exciting moments in our lives. Nearly two decades ago, RAM began reinventing mounting systems so that enthusiasts could use their cameras and video equipment like never before. RAM is proud to offer a sleek new adapter that will bring two revolutionary product lines together and open up a world of possibilities. While the GoPro® line of mounting accessories is nothing to scoff at, the diversity of the RAM product line is simply unmatched. Dream it. Live it. Capture it. RAM Mounting Systems and GoPro® make it possible to truly “Be a HERO™”.

The RAP-B-202-GOP1 consists of a 1″ diameter rubber ball, connected to a custom GoPro® adapter. The adapter attaches directly to the under-side of the camera, replacing the factory mounting bracket.

Features:

  • Patented rubber ball design dampens shock and vibration helping to extend the life of your camera
  • Mount to many RAM double socket arms and mounts
  • Multiple articulation and adjustment points for perfect viewing angles
  • Lifetime warranty
ALSO READ  Motorcycle Face Mask

Material:

  • High Strength Composite

Ball Size:

  • 1″ Rubber Ball “B” Size

8

RAM Mounts Garmin VIRB Camera Adapter

The RAM-B-202U-GA63 consists of a 1″ diameter rubber ball connected to a custom Garmin VIRB camera adapter. The adapter attaches directly factory mounting bracket.

Features:

  • Patented rubber ball design dampens shock and vibration helping to extend the life of your camera
  • Mount to many RAM double socket arms and mounts
  • Multiple articulation and adjustment points for perfect viewing angles
  • Lifetime warranty

Material:

  • High strength composite

Ball Size:

  • 1″ rubber ball “B” size

9

Cycle Mount GoPro Mirror Mount Kawasaki / Suzuki / Triumph

The Cycle Mount for GoPro cameras is the ideal solution for anyone taking a GoPro on to the track. They bolt directly to your OEM mirror post and eliminate flex and vibration associated with stick on mounts. 

Features:

  • Constructed of high strength plastic
  • Includes stainless steel hardware
  • Quality foam rubber pads on the bottom to protect your paint finish
  • Works great with track bodywork
  • Includes matching mirror block off
  • 360 degree rotation
  • Reduces the risk of loosing your GoPro

Note: Recommended only for bikes with track bodywork.

 
 

10

RAM Mounts Twist Lock Suction Cup Mount GoPro Kit

The RAM-B-166-A-GOP1U consists of a 3.25″ twist lock suction cup base, short double socket arm and 1″ diameter ball with custom GoPro® Hero adapter. The mount is designed with a RAM 1″ diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces.

The GoPro® Hero adapter attaches directly to the under-side of the camera, replacing the factory mounting bracket.

Material:

  • High Strength Composite and Powder Coated Marine Grade Aluminum

Ball Size:

  • 1″ Rubber Ball “B” Size