The Highway 21 Radiant is a lithium battery powered heated glove. The Hipora liner keeps your hands dry while the lithium battery power warms your hands.
The Alpinestars Stella Shore Gloves are lightweight hot weather gloves with key features to improve the overall protection. A leather palm and fingers stave off abrasion while still allowing tactile feedback of your motorcycle’s controls. Stretch fabric and mesh on the back of the hand allow your hand to breathe when the heat is stifling. Padded foam at the knuckles is comfortable and protective.
The BMW ProSummer X-Trafit Gloves use a combination of goatskin leather and nylon stretch material to create a lightweight breathable shell. Gore-Tex X-Trafit waterproofing stays attached to the exterior and will not turn inside out when removing your hand. There’s no thermal insulation to hold in heat, making these gloves ideal for warm weather tours with a chance of rain. Poron foam along the knuckles absorbs impacts and a rubber wiper helps to keep your face shield rain drop free.
Why trust us? We have a special algorithm that helps us rate and review each product!
The Alpinestars Stella SMX-1 Air v2 Gloves continue in the tradition of protective short cuff gloves that flow tons of air for hot weather riding. The latest version uses a new chassis with a redesigned cuff closure, padded fingers and strategically placed stretch material. The V2 glove combines perforated leather and heavy duty mesh to create a glove that breathes well during hot weather while still providing basic motorcycle protection. Synthetic suede at the palm and sides of the glove provide reinforcement against abrasion as well as regular wear and tear.
The Synergy 2.0 Gloves include the Power Lead Wiring Harness, Single Control Rheostat and an extended V-Split Connector (Required when using Synergy Gloves with Synergy Pant or Vest liners).
|Temp Setting||Temp (F)||Draw (W)||Draw (A)|
Ready for riding in the summer heat, the Firstgear Rush Air Gloves are constructed from a mesh backhand with a perforated synthetic leather palm to keep you hands from becoming clammy. The knuckles have embossed Airprene reinforcements, while the short cuff is secured by a hook and loop closure. Need to access your phone or GPS? No need to remove your glove with the touchscreen-friendly fingertips.
The Venture 12V Heated Carbon Gloves combined style, warmth, and performance together to create a motorcycle glove you are sure to enjoy.
On the inside is 3M Thinsulate insulation and a waterproof membrane to keep your hands warm and dry. To turn on the heat, simply touch the on-board temperature controller and enjoy 3 different heat settings. These heated motorcycle gloves will keep your fingers warm for as long as you can ride. If you need to pull over and take a call, the touch screen capabilities allow you to use your phone without having to take your gloves off.
The heating elements are carefully positioned around the perimeter of the hand to allow warmth to be circulated throughout your hand giving the comfort and protection you need. This great looking glove is made with premium leather and has built-in gel pads as well as a carbon fiber knuckle guard for ultimate comfort and protection.
Venture 12V Heated Carbon Gloves are powered by the existing battery of your motorcycle and will provide heat as long as you’re on the road. Simply connect the harness to the terminals on the battery and run the coax cable underneath the body leaving the connector plug exposed. This non-intrusive configuration allows you to maintain the same look and feel to your bike without cables interfering. Pair the Venture Heat 12V Gloves with the Venture Heat 12V Heated Jacket Liner or wear them on their own using the included Y-Splitter Cable.
Note: As a safety feature, if your motorcycle is outputting greater than 14 volts, it may cause the gloves to turn off. To prevent this, Venture Heat recommends first starting your motorcycle then plugging in the gloves. It should be noted that many motorcycles will operate at >14V, so it is recommended to check the voltage output of your bike before ordering.
Don’t let the weather stop you from riding – the waterproof and windproof Joe Rocket Rocket Burner Gloves feature a heating system with 3 settings and includes 2 rechargeable batteries.
The Fly Ignitor Heated Gloves have stainless core heating technology to provide superior life, even heating, and extreme durability. The lithium ion battery and controller has 3 optional heat settings for a variety of conditions.
Gerbing 7V S7 Gloves feature a windproof liner backed with premium insulation. The generous cuff fully overlaps the sleeves of your jacket to block out any frigid wind. Gerbing heated gloves incorporate Gerbing Microwire heat technology so you feel the heat but not the presence of wires.
Small reinforcement layers are added to the fingertips for extra grip and added abrasion resistance. The index finger is equipped with a conductive material for ease of use with your smartphone or tablet without the hassle of removing your gloves.
Each glove features a temperature control button mounted on the cuff and a rechargeable lithium ion battery housed within the cuff. Heat settings are high, medium and low, enabling you to adjust the temperature settings on the fly.
Note: 7V lithium battery and charger sold separately.