johnnycash's 1989 Honda VTR 250
Info: My new VTR-250. Before I took the fairing off for repair.
Views / Day: 0.4
957x1426 / 316 KB

 
Views / Day: 0.8
1239x891 / 304 KB

 		 Info: Shows the big crack in the left fairing of VTR 250
Views / Day: 0.3
800x599 / 83 KB

 		 Info: Here I am drilling holes around the big crack
Views / Day: 0.3
800x599 / 225 KB

 
Info: Adding a reinforcement plate to back side. It is actually an old license plate corner.
Views / Day: 0.3
800x599 / 217 KB

 		 Info: I have spray glued a few carbon fiber fibers on outside. Next step is painting on West System epoxy then covering layup with rip stop nylon fabric.
Views / Day: 0.3
800x599 / 83 KB

 		 Info: Here is the back side of the fairing after the epoxy has been applied and the wounds have been covered with ripstop nylon. Dacron fabric also works. Once the epoxy hardens just peel off the fabric and...
Views / Day: 0.3
800x599 / 159 KB

 		 Info: I have spray glued some carbon fiber cloth onto the right part of the fairing and will do that to the left side. Once wet with epoxy, I will wait until the epoxy gets "green, (dry to touch but st...
Views / Day: 0.4
800x599 / 225 KB

 
Info: Bike in black, no bodywork. Forks straight and working, new chain and sprockets. YZ rear sprocket, Suzuki front sprocket all working in harmony.
Views / Day: 0.7
800x600 / 136 KB

 		 Info: almost ready for primer and paint.
Views / Day: 0.2
800x386 / 56 KB

 		 Info: This is a photoshop version of what I want the side to look like.
Views / Day: 0.7
800x575 / 108 KB

 		 Info: photoshopped camo
Views / Day: 0.9
800x575 / 112 KB

 
Info: We've been working on the bike. The stock panels have been repaired. It is becoming Camo VTR. This closeup shows the front of the fairing. the chin panel under the headlight was remade from carbon fi...
Views / Day: 0.2
800x600 / 170 KB

 		 Info: Here the nose panel from the bottom. The paint job isn't important under here. Sheet metal screws will be used attach it to the side panels.
Views / Day: 0.2
800x600 / 152 KB

 		 Info: I am showing the modified mirrors for my VTR 250. The original equipment mirrors were missing and replaced with standard rectangular mirrors. They would hit the fairing at full lock. I cut them off an...
Views / Day: 0.3
800x616 / 167 KB

 
Views / Day: 0.6
800x523 / 222 KB

 

Views / Day: 0.8
800x540 / 236 KB

 
Views / Day: 1.0
800x575 / 126 KB

 		    
   
   
Photos: 18
Purchased: n/a
Sold: n/a

Related Links:
Return to johnnycash's BikePics Member Page
Return to the BikePics 1989 Honda VTR 250 Page
Return to the BikePics Honda VTR 250 Page
Return to the BikePics Honda Page


©1997-2009 Bikepics PTY LTD (Australia)