db75xl100's 1975 Can-am TNT 125
Info: I am assembling the engine for this bike at this time.  So it is missing from the picture.
Views / Day: 0.3
1024x768 / 285 KB

 

Views / Day: 0.3
1024x768 / 262 KB

 
Info: This is the engine for my 1975 Can-am TnT 125.  I have it mostly assembled.
Views / Day: 0.5
1024x768 / 283 KB

 
Info: I finally have the engine in the frame!
Views / Day: 0.2
480x360 / 42 KB

 
Info: Here is the other side.  I have to swap the all the cables onto the new engine.
Views / Day: 0.2
480x360 / 41 KB

 
Info: I have finally got all the cables unseized, a seat on, the engine mounted, and the exhaust system installed.
Views / Day: 0.3
600x450 / 52 KB

 
Info: Here it is again!  I fabricated the foot peg on this side.  I also built half of the throttle assembly.  I hope to get it running soon!
Views / Day: 0.4
600x450 / 51 KB

 
Info: Here are a couple of pictures of my Can-am now that I have it running quite well, and tuned up!  The original rear shocks did not move at all so I put on a pair of 14.5" shocks from a 1975 Yamaha...
Views / Day: 0.3
700x525 / 87 KB

 
Info: Here is a front shot of the Can-am.
Views / Day: 1.0
700x525 / 85 KB

 
Info: I have now swapped my can-am 125 engine into a 1977 Can-am 175 Qualifier frame with lay down suspension.  I also installed the newer silencer.  Now the back handles far better on the jumps, but I need...
Views / Day: 0.4
700x525 / 107 KB

 
Info: Here is my Can-am with 1983 XR200R front forks, and 1978 CR125 Elsinore rear shocks installed!  The XR forks were 35mm so they fit right in to the stock Can-am triple tree, + they are air assist!  
A...
Views / Day: 0.3
700x525 / 63 KB

 

Views / Day: 0.4
750x562 / 135 KB

 
       
       
   
   
Photos: 12
Purchased: n/a
Sold: n/a

Related Links:
Return to db75xl100's BikePics Member Page
Return to the BikePics 1975 Can-am TNT 125 Page
Return to the BikePics Can-am TNT 125 Page
Return to the BikePics Can-am Page


©1997-2009 Bikepics PTY LTD (Australia)