| |
| Current: |
2002 Honda XR 50
Photos: 4
Purchased: Jul 2009
Info: I just installed a BBR 82cc kit with BBR MX grind race cam. It also has an inner rotor flywheel kit. I have new fork bushings and custom fork spring spacers, to make it sit 1.5" taller than stock. It also has Renthal CR80 bars cut down 1 1/16" on each end. I also have a new Kenda K760 rear tire on it. This thing will catwalk in 2nd with a blast of throttle!
|
|
|
|
2000 Honda XR 50
Photos: 1
Info: BBR bars and triple clamp, inner rotor kit, and high lift race cam!
|
|
|
|
|
|
|
2007 Honda CRF 250
Photos: 8
Purchased: Jul 2010
Info: This bike has ACD radiator guards, Richochet full coverage skid plate, Moose hand guards, Rekluse Z-Start Pro clutch, 12/51 gearing, MSR fuel screw, R&D Powerpump II, and Michelin S12/M12 tire combo. Very capable machine with lots of power!
|
|
|
|
|
|
|
2002 Yamaha WR 426F
Photos: 5
Purchased: Jan 2011
Info: This bike has Hotcams, FMF Powercore 4 pipe, air box lid removed, rejetted, and needle changed, Merge adjustable leak jet, Moose Forkskins, Renthal bars, Mitas C-06 rear tire and C-11 front, UNI crankcase breather, 16/49 gearing. It makes the uncorked 06 CRF450X feel sleepy!
|
|
|
|
2007 Kawasaki KX 450F
Photos: 10
Purchased: Aug 2011
Info: This bike belongs to my younger brother. Does it ever rip!
|
|
|
|
2006 KTM 250 SXF
Photos: 1
Purchased: Oct 2011
Info: I have finally got this bike all completed! It has a fully rebuilt engine with Hot Rods rod kit, ProX piston kit, Dirt Tricks cam chain tensioner etc, it also has Moose hand guards, with Bonz mounts, KTM hard parts radiator frames, custom stainless skid plate, Leo Vince slip on exhaust, R&D Powerpump II, MSR fuel screw, hr meter, Pro fork bleeders, 12/48 gearing, and MotoZ Tractionator Enduro S/T
|
|
|
|
|
|
|
2006 Honda CRF450X
Photos: 1
Purchased: Oct 2011
Info: This bike has, Hot Rods crankshaft, Kibblewhite black diamond intake valve and spring kit, red anodized Unibiker rad guards, Pro Taper fat bars and mounts, Moose hand guards, Shorai Lithium battery, all UFO black plastic, Pro Circuit T-4 slip on exhaust, hr meter, red UFO chain slider kit, Mitas C21/C20 tire combo, UNI air filter, modified air box and rejetted carb, etc.
|
|
|
|
2007 Kawasaki KX 250F
Photos: 7
Purchased: Aug 2012
Info: This bike has, Scorpion rad guards, Moose hand guards, and air filter, Renthal bars, FMF Powercore 4 pipe, MotoZ Terrapactor S/T tires and 12/51 gearing.
|
|
|
|
2007 KTM 250 SXF
Photos: 6
Purchased: Sep 2012
Info: This bike has an H-T Racing 305 big bore kit, FMF 4.1 titanium full exhaust system, Cycra Powerflow plastics, and it is loaded with KTM Hardparts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Past: |
1975 Honda XL 100
Photos: 4
Purchased: Nov 2001
Info: This is a 1975 model that I found under a pile of barbed wire at our local dump. I bought the 1974 fuel tank off ebay and then repainted it, but left the 74 decals. The seat was found at the dump at a latter date. The muffler is off of a 1996 Honda 300 quad and the exhaust system is home made and needs to be painted! This is a very Quiet bike!
|
|
|
|
1978 Honda XL 125
Photos: 3
Info: Yamaha IT125 chassis with XL125 engine fit into it. Custom exhaust and homebuilt muffler.
|
|
|
|
1981 Honda XL 500
Photos: 21
Purchased: Jun 2007
Sold: Oct 2011
Info: Flat track XL500R engine bored 0.5mm over, XR camshaft, balencer chain removed, K&N filter, stainless steel side panels like the C&J framed XLs. 19.5" long BRP Can-am Outlander rear shocks with XR springs and custom preload adjusters, 79 Husky CR250 forks and front wheel, YZ125 rear wheel. Custom exhaust with power valve flap.
|
|
|
|
1980 Honda XL 500
Photos: 12
Purchased: Oct 2006
Info: Very nice and reliable bike. Superb fuel economy. Custom exhaust, 81 XL500S box section swing arm.
|
|
|
|
|
|
|
1984 Honda XR 100
Photos: 8
Info: 1978 CR125 rear twin shocks, and Yamaha IT forks with Can-am triple clamp. Custom exhaust.
|
|
|
|
1981 Honda CR 125
Photos: 6
Info: Bored out to the max, Wiseco piston kit, new big end bearing. This bike has a huge amount of torque for a 125.
|
|
|
|
1993 Honda CR 125
Photos: 12
Purchased: Feb 2007
Sold: Apr 2010
Info: This bike has, the cylinder ports opened up, FMF Fatty pipe and silencer, Boyesen power reeds, 2nd over Wiseco piston kit, new main bearings and all seals, and a Team Honda seat cover.
|
|
|
|
1986 Honda CR 80
Photos: 2
Purchased: Feb 2007
Info: This bike is sold. All stock. Very fun little bike with lots of power!
|
|
|
|
|
|
|
|
|
|
|
|
|
1984 Honda XR 500
Photos: 6
Sold: May 2011
Info: This XR is bored to 510cc with a Wiseco piston bumping compression to 10.25/1, and has a Paris Dakar race cam and race valves. It also has a Barnett clutch kit.
|
|
|
|
1993 Honda XR 250
Photos: 5
Purchased: Oct 2007
Sold: Aug 2010
Info: Sold. Rebuilt engine with Honda 0.25mm over piston kit, K&N air filter, Renthal bars, UFO plastics and headlight, and Super Trapp exhaust.
|
|
|
|
1979 Honda XL 500
Photos: 5
Purchased: Nov 2007
Info: All stock XL500 painted like an XR.
|
|
|
|
1977 Can-am Qualifier 175
Photos: 4
Info: This is a 77 Qualifier 175 chassis with 75 TNT 125 engine. It has XL500 rear shocks to lift it about 3" higher than stock, and XR200 forks slid into the Can-am triple clamps.
|
|
|
|
1986 Honda CR 125
Photos: 7
Purchased: Jan 2008
Sold: Sep 2011
Info: This bike has a Hot Rods rod kit, Wiseco piston, in 89 CR125 cylinder, Boyesen reeds, and PSI pipe.
|
|
|
|
1976 Honda XL 350
Photos: 4
Info: Custom framed XL350 project. Similar to a MK2 KSI 450.
|
|
|
|
|
|
|
|
|
|
|
|
|
1985 Honda CR 500
Photos: 14
Purchased: May 2008
Info: This bike had a hole smashed in the bottom of the crankcase when I bought it that I did not know about. I seized the crank big end up right after I bought it. I had the cases welded up, installed another crank and new main bearings and seals and another std. piston and rings. The reeds were worn out, so I put in Boyesen Power reeds. It has Leak Proof forks seals and they work well. I have a n
|
|
|
|
1984 Honda XL 250
Photos: 5
Purchased: Aug 2008
Sold: Apr 2009
Info: This bike is sold. It was in amazing condition when I bought it having been stored in a shed for years.
|
|
|
|
1999 Honda CR 250
Photos: 27
Sold: Jun 2012
Info: Both my older and younger brothers own 99 CR250s now. These are two very nice bikes!
|
|
|
|
|
|
|
1984 Honda XL 600
Photos: 9
Purchased: Oct 2008
Sold: Jun 2010
Info: This bike started out a very thrashed XL600. I have tried to turn it into a XR600. It has CR250 forks and triple tree, XL600 frame and engine with XR500R flywheel, XR600 alu swing arm, XR350 rear shock, custom raising link to make XR spec suspension, and a steeper fork rake, cut down XL600 rear wheel with rubber cush drive and a Kenda K760, K&N filter, custom exhaust, and far richer jetting. It
|
|
|
|
1996 Honda XR 400
Photos: 12
Sold: Aug 2012
Info: This bike is owned by my younger brother and myself. He rebuilt the top end right after we bought it. It runs perfect with plenty of power!
|
|
|
|
1999 Kawasaki KX 125
Photos: 3
Purchased: Apr 2009
Sold: Apr 2009
Info: This bike is sold.
My younger brother bought this bike only to trade for a sled from another fellow. We only had it a day.
|
|
|
|
1991 Honda CR 250
Photos: 16
Purchased: Apr 2009
Sold: Apr 2010
Info: I bought this in the spring of 09 as a frame and blown engine. I put it all together with many parts from ebay. I do not like the look of the 91 CR250s with the orange and white, so I fit all 1992 style plastics and newer. Many mid 90s CR500 plastics bolt right on to the 90/91 CR250, like the rear fender and number plates.
|
|
|
|
1996 Honda XR 200
Photos: 2
Sold: May 2010
Info: This bike is sold. All stock, except for restrictor removed from muffler. Needs to be rebuilt.
|
|
|
|
|
|
|
2001 Kawasaki KDX 220
Photos: 6
Purchased: Oct 2009
Sold: May 2010
Info: All stock, except for the air box mod, Wiseco piston kit, and Factory Effex graphics.
|
|
|
|
2001 Honda CR 250
Photos: 14
Purchased: Oct 2009
Sold: Apr 2013
Info: This bike was rebuilt in the spring of 2010. Vertex piston kit, new con rod kit, new main bearings and all seals, V-Force 3 reeds, Pro Circuit pipe, Renthal Twinwall bars, and 01 CR125 plastics. It also has 12/53 gearing, Moose hand guards, Motoz front tire with S12 rear, Works Connection skid plate, and custom radiator brace. I am also running Enviro Save in it. Does it ever work! I would rec
|
|
|
|
1999 Yamaha WR 400F
Photos: 9
Purchased: Apr 2010
Sold: Apr 2012
Info: This bike is owned by one of my younger brothers. It has just been rebuilt with Pro-X forged piston kit, new valve stem seals, new cam chain, HotCams Stage 2, rejetted carb and an R&D Power pump. The R&D pump is well worth it! The WR bog is now gone! Instant throttle response! It also has YZ400F seat, tank, and number plate, and YZ450F front fender.
|
|
|
|
2000 Honda XR 650
Photos: 14
Purchased: May 2010
Sold: May 2012
Info: I bought this XR650R on May 22, 2010. The right lower subframe mount was cracked off of the frame, the kickstart knuckle was also broken, and the kickstand, taillight and headlight were all missing. It has the HRC power up kit, and Renthal bars. I have now installed a HotCams Stage 2 camshaft, UNI air filter, and an XR400 CDI to raise the rev limiter from the stock 8300 rpm to 9500 rpm.
|
|
|
|
2001 Yamaha YZ 250F
Photos: 6
Purchased: Jun 2010
Sold: Apr 2012
Info: This bike has Works Connection frame guards and skid plate, Fluidyne radiators, Pro Taper bars, Guts seat cover, Acerbis plastics, BBR billet kick lever, and a Hot Rods rod kit installed in the crank as the original rod broke on the big end. It also has Moose hand guards, 12/53 gearing, and a MotoZ Terrapactor S/T rear tire.
|
|
|
|
2005 Yamaha YZ 250F
Photos: 15
Purchased: Aug 2010
Sold: Sep 2012
Info: This bike has Moose radiator guards, skid plate, and handguards, MotoZ Terrapactor S/T tires, hour meter, MSR fuel screw, Dirt Digits shroud graphics, 12/53 gearing, and 10 oz Zip-Ty Racing flywheel weight kit. Very nice machine in steep tight woods!
|
|
|
|
|
|
|
|
|
|
2006 Kawasaki KX 450F
Photos: 12
Purchased: Jul 2011
Sold: Apr 2013
Info: I bought this bike from a friend who needed money. It was popping and backfiring badly at the time. I checked the valves and they were in spec, but I noticed that the intake cam lobes had slipped about 10 degrees on the cam sprocket center. I pressed the sprocket off the cam, indexed it, pressed it back on and tack welded it. It runs much better now! I also installed Moose hand guards, BRP fu
|
|
|
| |
| Friends: |
2005 Honda CRF 450
Photos: 2
Info: This bike is owned be one of my Customers! Very nice bike!
|
|
|
| |
| Dream: |
2005 Ski Doo Tundra
Photos: 1
Info: All stock. Very capable little sled. Superb deep snow flotation. Will skip water too.
|
|
|
|
|
|
|
2000 Ski Doo MXZ 440
Photos: 2
Purchased: Jan 2009
Info: This is a MXZ 440 fan. We put on a 1.5" Camoplast Ripsaw paddle. We also have custom twin pipes for it.
|
|
|
|
|
|
|
1998 Ski Doo Summit 670
Photos: 1
Sold: Nov 2012
Info: All stock except for, HPG rear shock, custom 8" riser, and MBRP can. These 670X are very fast and powerful!
|
|
|
|
1994 Ski Doo Summit 670
Photos: 8
Sold: Feb 2010
Info: Twin Jaws pipes, gutted airbox, A.D. Boivin rear suspension, extrovert drivers, light weight skis.
This picture is of the 99 Summit X 670 chassis that the 94 engine and pipes got swapped into after I sold it.
|
|
|
|
2000 Ski Doo summit 700
Photos: 4
Purchased: Jan 2010
Sold: Oct 2012
Info: This is my 2000 Summit 700 Highmark mod. It has a rebuilt engine, ported and polished cylinders, twin Split Second pipes, UFO''s, UNI pods, custom cold air intake, roller secondary clutch, Rox 5.5" adjustable riser, Sno Bugs Launch Pads, Precision skis, 1" tunnel lift, and a ported and shaved 151x2" track.
|
|
|
|
2002 Ski Doo Summit ZX 800
Photos: 1
Purchased: Feb 2010
Sold: Nov 2012
Info: This is an 02 Summit 800 Highmark X 151. It has V-Force 3 reeds and cages, ceramic coated pipe, MBRP race can, and a ported track.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Personal Photos |
|
|
|
 |
|
