bcstudent's 1995 Suzuki RG 125

Views / Day: 0.2
3264x2448 / 2,541 KB

 
Views / Day: 0.1
2448x3264 / 2,422 KB

 		 Info: Rebuild progress as of 03-02-2010.
Views / Day: 0.2
1280x960 / 284 KB

 		 Info: Progress - 08-02-2010 Starting to look like a bike. Note: bent right clip-on!
Views / Day: 0.1
1280x960 / 345 KB

 
Info: Progress - 13-02-2010
Views / Day: 0.2
1280x960 / 350 KB

 		 Info: Progress - 16-02-2010 Note the cable-tie holding the silencer to the footrest bracket. The silencer is from a VJ22 RGV250 and the mount is about 15mm too short. This is only temporary!
Views / Day: 0.1
1280x960 / 338 KB

 		 Info: Progress - 16-02-2010
Views / Day: 0.2
1280x960 / 346 KB

 		 Info: Running for the first time since the restoration began. Only a slight issue with a broken wire in the starter circuit caused any issues...until the magneto key sheared that is - 20-02-2010
Views / Day: 0.2
1280x960 / 326 KB

 
Info: Progress - 04-04-2010. A few jobs left to do before the MOT but nothing major. Shame to put all the crappy bodywork back on.
Views / Day: 0.1
1280x960 / 339 KB

 		 Info: Progress - 04-04-2010. A few jobs left to do before the MOT but nothing major. Shame to put all the crappy bodywork back on.
Views / Day: 0.2
1280x960 / 293 KB

 		 Info: Finally together, running and MOT'd as of today. Still a few jobs to do, most notably getting the bodywork repaired and sprayed and fixing the knackered powervalve servo - 21/04/2010
Views / Day: 0.2
1280x853 / 377 KB

 		 Info: So it begins... - 11/10/2009
Views / Day: 0.2
1280x853 / 304 KB

 
       
       
       
Photos: 12
Purchased: Jul 2009
Sold: n/a
Information: Project bike number two. Bought as a tatty non-runner that had clearly suffered greatly at the hands of many 17 year olds. Required total restoration. August ''09 - Project well under-way. Frame, swinging arm and wheels powder-coated and engine rebuilt. Power valves both found to be unserviceable. November ''09 - Built up as rolling chassis with engine fitted. January ''10 - Project resumes and parts going on. New powervalves acquired. February ''10 - Mostly back together and running. Ran twice before magneto worked loose and sheared Woodruff key. April ''10 - Problems with the gearbox meant the engine had to come out again. Back together and running. A few jobs left for the MOT but nothing major. May ''10 - MOTd, taxed and on the road.

Related Links:
Return to bcstudent's BikePics Member Page
Return to the BikePics 1995 Suzuki RG 125 Page
Return to the BikePics Suzuki RG 125 Page
Return to the BikePics Suzuki Page



©1997-2013 Bikepics PTY LTD