bcstudent's 2002 Yamaha Majesty 125

Views / Day: 0.2
683x1024 / 148 KB

 

Views / Day: 0.3
1280x853 / 224 KB

 

Views / Day: 0.3
3264x2448 / 2,791 KB

 

Views / Day: 0.2
2448x3264 / 2,152 KB

 

Views / Day: 0.2
3264x2448 / 2,485 KB

 

Views / Day: 0.2
3264x2448 / 2,585 KB

 

Views / Day: 0.4
3264x2448 / 2,841 KB

 

Views / Day: 0.3
3264x2448 / 2,819 KB

 

Views / Day: 0.2
3264x2448 / 2,522 KB

 

Views / Day: 0.2
3264x2448 / 2,115 KB

 

Views / Day: 0.6
2448x3264 / 2,202 KB

 

Views / Day: 0.2
3264x2448 / 2,413 KB

 
       
       
       
Photos: 12
Purchased: Jun 2009
Sold: n/a
Information: Project bike number one. Unsure if it''s worth repairing. Bought for £50 but has a knackered big-end. A rod kit may be available but the alternative is a new crank at £400. If the latter turns into the only option it''ll be going on eBay! June 2011 - Crank rebuilt. Original con-rod and big-end bearing in a horrible state. Engine going back together with new piston rings, crank seals and valve stem seals. July 2011 - Bike back together but feels down on power. Fault traced to split carb diaphragm. New part £160 so original repaired with rubber sealant. Seemed to work fine. Bike serviced, MoT''d, taxed and on the road. Other than the exhaust falling off when the retaining bolts did a runner, there have been no problems. The bike was initially donated to my dad to use as a run-about but was eventually swapped for the T-Max. Glad to have it back!

Related Links:
Return to bcstudent's BikePics Member Page
Return to the BikePics 2002 Yamaha Majesty 125 Page
Return to the BikePics Yamaha Majesty 125 Page
Return to the BikePics Yamaha Page



©1997-2013 Bikepics PTY LTD