1989 Honda VTR 250

[164] 1296x1230 / birrobi
deva Romania
 
[322] 2592x1944 / birrobi
deva Romania
 
[284] 800x575 / johnnycash
Ne United States
 
[209] 800x540 / johnnycash
Ne United States
 

[167] 800x523 / johnnycash
Ne United States
 		 Info: I am showing the modified mirrors for my VTR 250. The original equipment mirrors were missing and replaced with standard rectangular mirrors. They would hit the fairing at full lock. I cut them off an...
[88] 800x616 / johnnycash
Ne United States
 		 Info: Here the nose panel from the bottom. The paint job isn't important under here. Sheet metal screws will be used attach it to the side panels.
[57] 800x600 / johnnycash
Ne United States
 		 Info: We've been working on the bike. The stock panels have been repaired. It is becoming Camo VTR. This closeup shows the front of the fairing. the chin panel under the headlight was remade from carbon fi...
[62] 800x600 / johnnycash
Ne United States
 

[281] 2560x1920 / soguess
Berkeley United States
 		 Info: photoshopped camo
[256] 800x575 / johnnycash
Ne United States
 		 Info: This is a photoshop version of what I want the side to look like.
[216] 800x575 / johnnycash
Ne United States
 		 Info: almost ready for primer and paint.
[94] 800x386 / johnnycash
Ne United States
 
Info: Bike in black, no bodywork. Forks straight and working, new chain and sprockets. YZ rear sprocket, Suzuki front sprocket all working in harmony.
[295] 800x600 / johnnycash
Ne United States
 
[569] 1600x1200 / mjones
Sandy United States
 		 Info: I have spray glued some carbon fiber cloth onto the right part of the fairing and will do that to the left side. Once wet with epoxy, I will wait until the epoxy gets "green, (dry to touch but st...
[147] 800x599 / johnnycash
Ne United States
 		 Info: Here is the back side of the fairing after the epoxy has been applied and the wounds have been covered with ripstop nylon. Dacron fabric also works. Once the epoxy hardens just peel off the fabric and...
[137] 800x599 / johnnycash
Ne United States
 
Info: I have spray glued a few carbon fiber fibers on outside. Next step is painting on West System epoxy then covering layup with rip stop nylon fabric.
[138] 800x599 / johnnycash
Ne United States
 		 Info: Adding a reinforcement plate to back side. It is actually an old license plate corner.
[117] 800x599 / johnnycash
Ne United States
 		 Info: Here I am drilling holes around the big crack
[137] 800x599 / johnnycash
Ne United States
 		 Info: Shows the big crack in the left fairing of VTR 250
[131] 800x599 / johnnycash
Ne United States
 

[362] 1280x960 / mjones
Sandy United States
 
[319] 1280x960 / mjones
Sandy United States
 

[426] 1280x960 / mjones
Sandy United States
 
[342] 1239x891 / johnnycash
Ne United States
 
< BACK
174 Photos were returned
Page: <1> [2] [3] [4] [5] [6] [7] [8]
NEXT >


Links:
Full listing of members with this bike [42]
Listing of members who have photos [36]

Return to the BikePics 1989 Honda VTR 250 Page
Return to the BikePics Honda VTR 250 Page
Return to the BikePics Honda Page
©1997-2009 Bikepics PTY LTD (Australia)